a guide to installing your hook


Our hooks are made in Sydney from 100% Recycled Plastic, making them suitable for indoors or outdoors.

Before installing your wall hook, we recommend consulting a handyman on the best way to install onto your preferred surface.

TIP: Use the ruler provided with your hook to check your markings on the wall. Large hooks have a 335mm gap between screw and the Small, 235mm.

step one

Position your hook as desired then rotate it so that the flat edge is against the wall.

step two

Mark the top points of the screw slots on your wall.

step 3

Secure the screws at the marked points leaving 5mm of the screw head exposed.

step four

If required, use the appropriate plugs
and fixtures for your wall material.

step five

Place your hook onto the wall with the screw heads at the base of the screw slots.

step six

Gently pull down to secure.